Less water in the radiator causes the engine warm

Car Radiator when you see smoke or a burning car on the streets, of course there is something wrong in the engine. One reason is lack of water in the radiator causing the engine heat.

In addition, the engine heat also caused by clogged radiator pipes, dirt and damage the radiator fins on the fan and thermostat coolant system.

In fact, less accurate ignition system, damage to the channel system of petrol, the exhaust is blocked, problems dibble, have a friction brakes and how to manage vehicles also cause poor engine heat.

Engine that is too hot can invite danger if late act because it can cause your vehicle smoke, fire and subsequently exploded.

When your car engine too hot, with a roadside stand in the shade. You should not panic, but stopped the car and try to do their own inspection first.

The first step, open the bonnet to cool the vehicle while the engine and check one of the sources mentioned just now. After that, check your vehicle radiator to ensure leaks do not occur in that section.

After that check the fan belt. If there is a leak in the radiator or a broken fan belt, switch off the engine. If no leaks in radiator and fan belt is still good, switch the vehicle engine and the instantaneous rotation higher than usual.

Step is to allow air flow through the radiator fins with a total of many. Water in the radiator will be cold and water pump will work more quickly so that coolant water can flow better.

Not long after that the engine temperature will decrease. Then just drop the rotation of the engine and open the radiator cap. Closing should open carefully to avoid dangerous spray of hot water and steam out of the radiator.

Fill water into the radiator slowly while the engine is still in normal circumstances and switch off the engine if already a cold. If too little water in the radiator, it will cause the engine heat and steam will exit from the radiator.

In this case, switch off the engine immediately and check the radiator.

Firstly, open the radiator cover and get behind the players knock using screws and slowly rotate the cloth.

Hold up to close to prevent steam in the radiator to flow out and into low pressure in the radiator. After it was released a veil.

If, there is a leak in the radiator especially at the connection or paipnya channels, switch on the engine rotation is higher than usual and check the connection is.

Condition is important because there is some leakage can not be seen in a low engine rotation. If there is leakage, tight screw fastener and loop fastener if damaged, use wire instead.

If you have a leak, wrap the damaged section with adhesive tape and strong with wire. You must remember that improvement only for a while before the vehicle was brought to a workshop near.

Radiator pipe blockages arising from the crust or rust will affect the water cycle or even cease to have caused a lot of water.

The situation could be known by checking the flow of water at PILI disposal. If water does not flow smoothly or not at all out, the situation shows the pipe clogged radiator.

To fix it, open the engine block PILI water until the water coolant can be issued. Open the radiator and wash off with clean water for approximately 10 minutes to remove the crust or rust.

Impurities in the radiator fins because of dry leaves, insects or mud that stick to the face will cause radiator coolant air flow will be interrupted until the water becomes hot.

Impurities on the surface can be cleaned using high pressure air or water menyemburnya use. Confusion on the steps also cause a vehicle operating vehicle engine heat.

Although the engine is in good condition but when the vehicle is climbing a hill or carrying excessive loads, it can be hot.

Engine can be cooled back to the way you stop the vehicle briefly, opening bonnet, switch the engine on high rotation or fill radiator with cold water.

User guard car tires

Tires are among the most important components in a vehicle. Reluctance and negligence care and change the tires are not flowering or often referred to as bald tires may invite problems on the road.

Tires play an important role during braking and must be durable to handle the pressure and road surface is sometimes uneven. Tires must also provide comfort when taking turns and steering control in any situation.


Typically, major tire manufacturers in the country is providing safety tips tire to the driver.

Here are the few useful guidelines:

* Immediately change the tire if the flowers are thirsty. Tires easily slipped way, affected by the braking effect and less sensitive in terms of grip. In the wet road conditions, vehicles may be difficult for Chevrolet and driver control.

* Selection of tires is important for safety, comfort, control and economy.

* Sudden braking can cause the tire to skid. Check tire pressure at least twice a month when tires in winter conditions. Manufacturers also stressed the priority to maintain tire pressure.

* Do not drive in a damaged tire. Change or repair as soon as possible.

* Immediately repairing tires is not normal. Make a habit to check pressure, wheel alignment and round. Avoid bad habits when driving such as driving too fast, braking suddenly and took a dangerous turn.

* Make sure the replacement tires are in good condition and can be used and have sufficient wind pressure.

* Do not combine with radial tires and radial tires without. At high speeds, the situation is causing interference which resulted in loss of vehicle stability control and serious injury.

* Always make sure the screws are properly installed and the wheels are not too tight. Impossible to open with the opening screw tire tire if it is too common with machines opening tight tire air.

* Do not let the tire load more. Chart weight and wind pressure is usually open in the wind to fill in any stations. |

* Tires can only accommodate a maximum capacity if it has a maximum wind pressure.

* Do not install tires that have been used at will unless you know its history. It means, if your lucky your sister to donate a set of tires because he want to buy new tires.

eat engine before the journey

To keep the vehicle can be used in a long tempo, drivers do not always recommended to do sprint, brake and deflection of a sudden, except in desperate circumstances.

PRACTICE switch engine and continue the road is not good. Preferably after the engine is switched on, leave two or three minutes before starting the journey. This is important to ensure that the engine in hot conditions.

During the process of heating, lubricating oil will flow to all parts of the engine. If the engine continues to be charged before heated, this means that the engine had to work when the oil has not reached every part of the necessary smooth.

Thus, each section that rub against each other will suffer thirst due to heavy encountered engine will more quickly damaged.

Calculated engine hot enough when needle water Air temperature rose slightly. Heating process also applies to the transmission system and other parts of the move. When already started driving, do not continue to accelerate. move slow for a while before the sprint.

In addition, the engine also can not be charged roughly. Do not let the engine work in a low gear with too long, for example, three gear when climbing hills.

Practice 'pull' low gear a long time to power acceleration also means that health is not healthy for the car. If left too long in a state that, in addition to reduced engine power, the engine will also be too hot. Engine that is always in a state of overheating will quickly damaged.

The engine will also be working more than the maximum rotation axle in a state of idle or gear at the time of transfer to a lower position (for example, from gear to gear two of three) performed at the time the vehicle is still moving with high speed or when the vehicle is gliding on the road steep). So, beware.

To keep the vehicle can be used in the long term also, recommended drivers do not always do sprint, brake and deflection of a sudden, except in desperate circumstances.

In addition, avoid the too frequent use of brakes on a steep road or at high speed to avoid problems with restrictions steam. Avoid also stepped dibble board when not needed and do not move the gear roughly, regardless of manual or automatic gear.

auto-charge voltage

Did you know the importance of movement power voltage and lifetime of a car? Many car problems that arise are related to the power supply voltage is not stable, until it becomes a serious problem. Typically, car owners often seek help when car mechanics problems.

However, they failed to find a way out and the main reason for addressing the problem. What a sad, car owners are forced to compromise on the issue. Try you think, "prevention is better than cure", so, we spend in order to protect health, as well as with our favorite car. Shop small car earlier in the treatment of a range of investment returns that bring revenue worth to you later.




Electric circuit system and the use of petrol cars also correlate each other. If the electrical circuit system is outdated, it is not only increasingly menghaus petrol car, petrol press problems, the rate of low engine life, even gear the car is not smooth. Each of these problems may be occurring because of a defect arising in the small electric car circuit system.

Auto charge

So, to achieve power consumption voltage optimum car, you need a system of electric circuits that perfect and stable. Now, the emergence of AUTO-CHARGE, electronic products and the latest Japanese not copy was able to repair the system stability circuit voltage electric car through best.

Once used AUTO-CHARGE, your car will be controlled perfectly capable of overcoming all because it is a small problem caused by the power voltage is unstable. Another advantages, how to install AUTO-CHARGE is very easy. It will operate when you reconnect to the ignition switch, without any tools to install equipment on the petrol tank may damage your car.


Special Features AUTO-CHARGE

AUTO-CHARGE Voltage best includes 3 system, namely:

* System Voltage best

* Battery Doctor System

* Disturbance Reduction System


Auto charge


Function and Effectiveness of AUTO-CHARGE

* Economical petrol effectively

* Stabilize response RPM

* Increase engine torque (engine torque)

* Increased power motor car engine

* Optimizing the function of electronic equipment in the car


Things that need to be considered

Do not open or modify the product to avoid any damage or injury.
This product is only designed for cars with a 12V power voltage only.
Do not disconnect or remove products from the ignition switch when the car is driven.
While i-CHARGE is used, ensure that each plug into the socket safely.

If ignition switch socket close, tight each eye socket before it is installed.
Petrol-saving effect is different according to driving, climate,
condition of roads and cars respectively.

Advantages of products

* Improve response and press the petrol engine power motor.

* Reduce car CPU errors, increase efficiency of electronic car equipment.

* Launch the gear train

* Improve response and sprint motor gasoline engine to save more.

* Maximizing the efficiency of life run more smoothly so that engine.
* Extending life expectancy of electrical circuits and systems tools electronics car.



advantage auto charge

How easy installation and safe. One option the first DIY
for women drivers

* Suitable for all types of cars and motorcycles.

* Reduces noise interference filter through noise, the sound system to provide more effective.

* Equipped with 2 Protection fuse for better protection and safe to use.

* Improve response rates RPM with a high velocity even gadget car air-conditioners installed at a maximum during hot weather.

* Reduce the rate of release of gases carbon monoxide (CO) and hydrocarbons (HC) into the air.

Action smoke when the car change color

Typically, the exhaust emissions for new cars do not need to concern. But, after several years of use, you certainly concerned with exhaust smoke gray and black. This shows there is wrong on your car engine parts, especially karburator.

Actually by looking at the color of exhaust smoke, you can examine the processes that occur in the combustion cylinder.

Among those who should be given attention by answering your questions is as follows:

First, does your car do not smoke or slightly blue color. If this happens, you should be relieved because it shows the process of combustion ratio compares well with the gasoline-air mixture is correct.

If you smoke, yellow or brown, which means very little in petrol (a mixture of too little).

What if black smoke? This means that the combustion process occurs that is not perfect because too many in the petrol. Smoke that comes out white or slight hint of blue also means lubricating oil per burn. In cold conditions usually also white exhaust smoke because of water vapor; situation like this, however common in each engine.

In the black exhaust smoke, there are several possibilities that can lead to conditions that occur, including air filter clogged, the air valve (choke) and closed karburator damaged.

To overcome this problem, first check whether the air filter clogged. When the engine moves, Open air filter. If the method is high and increases engine rotation is no longer black smoke, then clear the air filter dirty. Clean the air filter.

In addition check whether the air valve (choke) closed. If not closed or fully open when the engine is hot, it will cause excessive air-gasoline mixture. To check the situation, Open air filter and look karburator from above. If choke does not open fully, straight position.

Black smoke because karburator damaged. If this happens, bring your car to the workshop.

White exhaust smoke when too much lubricating oil flows into the fuel space. This happens because the piston, piston rings, cylinder walls, valves and valve damaged routes.

Lubricants can also enter the space if the fuel in the cylinder head gasket is damaged so that water can enter the space fuel. Water vapor that occurs because heat will go out with exhaust smoke cause white smoke.

However, usually can be distinguished between white and white steam as a result of oil lubricants. Vapor lubricants white and produce a certain smell.

Check the battery every week

BATTERIES between components is a very important part in the engine of a vehicle. Without it, the engine can not be sure the vehicle is turned on. Similarly, if your vehicle battery is weak, and lack of water damaged battery.

For users who are sensitive, you should make the battery and cable inspection at least once a week.

You should also check the box on the battery for damage that could affect the life of your vehicle battery power.

Usually the reason for damage that occurred to cause it does not last long is because when the walls split spam acid batteries.

Batteries will also lose power until the engine can cause your car difficult to run if using batteries that have been cracked.

However, you can still use the battery that the walls are cracked, but must take certain steps.

Among them, move your vehicle battery by putting the plastic liner. You clean the outside of proper battery first with detergent such as soap powder to remove grease and oily spots.

Then give space slightly cracked it using the knife before inserting cement into it to accommodate special damages. Batrepair, the cement can be purchased at special shops car accessories. You have to wait until a special cement that is applied on the fracture surface dry before taking further action.

After repairs are complete fractures, you may enter the liquid acid into the holes provided at levels determined.

However, it is recommended to bring the battery of the repaired car to the workshop to test the power of force using a special charger. Some new batteries can be repaired restored electrical power when engine is switched on.

Please note, if you charge the battery too long, it can damage the piece of lead. Lead fractures will cause power to be reduced battery power once the battery of your vehicle had to be changed.

However, some cars require a special charger device which may take about an hour before use.

Be sure to stick to the lining of the acid negative and positive battery terminals cleaned from time to time as the battery power lasted long.

A simple way is to remove acid membranes with pouring hot water on both the terminal.

However, you must be careful when pouring hot water into the terminal so that it is not affected by the other components. Side effects if acid membranes meet the terminal will cause the electric current is not going to require some components.